Last Updated on July 1, 2022 by freewarespace
If you need to install Windows 7 on a computer that has no DVD drive and you don’t have a network connection to install from a shared DVD drive on another computer, you can install the OS from a USB thumb drive. Make sure it has plenty of free space for the installation files (I used a clean 32 GB drive). You will need to wipe everything on the drive so be sure to back up any data you have there to a different location. Here are the steps to follow to prepare the USB drive.
Insert the USB drive into a computer that does have a DVD drive.
Click Start and in the search box, type
cmd
and press CTRL+SHIFT+ENTER to open the command prompt with administrative
privileges
At the command prompt, type
diskpart
At the DISKPART> prompt, type
list disk
Type
select disk
replacing with the number of the USB disk from the list of disks
Type
clean
Type
create partition primary
Type
active
Type
format fs=fat32 quick
Type
assign
Type
exit
Type
exit
The above is not a typo. You need to type “exit” twice, once to exit the DISKPART utility and then again to close the command prompt.
Now you can insert the Windows 7 installation disc and copy all files to the USB drive. To use it to install Windows 7, insert it in the computer where you want to install the OS, make sure the BIOS is set to boot from the USB drive first, and boot up to begin the Windows setup process.
